The following scale Product Manuals  are for customers with scales equipped with older MKE-5 Indicator (pre-2007 and pre-2017). To find out which version to use, reboot your MKE-5 indicator. At the time when the Arlyn Logo is shown, look at the bottom right corner of the screen. The firmware version is shown as R6.xxx or R5.xxx. Download the manual/software corresponding to your firmware version.

If you your indicator has the new firmware version R12.xxx, or if you have the Arlyn UpScale indicator, please go to Product Manuals & Specification Sheets page.

If you have difficulty viewing any of the following PDF files, please download and install the free Adobe Acrobat Reader software.

Version 6 – Product Manuals
MKE-5 R6.xxx – Instructions Manual Download
MKE-5 R6.1xx – USB Manual Download
MKE-5 R6.0xx – USB Manual (w/ Silicon Labs Chip) Download
MKE-5 R6.xxx – Options Manual Download
MKE-5 R6.1xx – Ultra Precision SAW Scale – Quick Start Download
MKE-5 R6.1xx – Ultra Precision SAW Scale – Instructions Manual Download

 

Version 5 – Product Manuals
MKE-5 R5.xxx – Instructions Manual Download
MKE-5 R5.xxx – USB Manual (w/ FTDI) Download
MKE-5 R5.xxx – Options Manual Download
MKE-5 R5.xxx – Service Manual Download
MKE-5 R5.xxx – Ultra Precision SAW Scale – Instructions Manual Download

Some of these software downloads (especially the R5.xx ones) will only work in Windows XP, and to an extent Windows 7. They are not compatible with Windows 8 and later. However, some customers have been able to get these downloads working on later versions of Windows.

Version 5/6 – Software Downloads
MKE-5 R6.1xx – USB Software CD* Download
MKE-5 R6.1xx – Wifi Software CD Download
MKE-5 R5.xxx – USB Remote (.zip) *WinXP only Download
MKE-5 R5.xxx – RS485 Remote (.zip) *WinXP only Download

*Remote Indicator included in the CD is not compatible with Windows 10. Scale USB Driver included in the CD is compatible with all versions of Windows.